Jetway JNF92-270-LF Intel Atom ITX Mainboard

The Jetway JNF94-270-LF is an alternative mainboard for Intel D945GCLF. However it is equipped already with the latest 45nm Atom CPU generation and does not need a fan.  As a premiere, this board enables DualChannel output to two VGA displays by using the additional extension card “2x LAN + 1x VGA”.

CPU INTEL®Atom N270 CPU(45nm,512K Cache, 1.60 GHz, 533 MHz FSB)
Chipset – INTEL®945GSE + ICH7 chipset
– Build-in INTEL®GMA 950 Graphics Core(Share Memory Size:64/128/224MB)
– Front Side Bus 533MHz
Memory 1 * SO-DIMM Sockets for un-buffered Single Channel DDR2 533/400 SDRAM up to 2 GB
Expansion Slots – 1x PCI
– 1x Jetway Daughter Board
Storage – 2 * Serial ATA2 3Gb/s connectors
– 2* Ultra DMA 100 / 66 IDE connector
Audio Realtek ALC662 6-Channel HD Audio CODEC w SPIF in and out
Ethernet LAN Realtek RTL8111C PCI-E Gigabit Ethernet LAN
USB Embedded 6* USB 2.0/1.1
Special Features Intel Diamond Ville Platform
Support ACPI S3
Support CPU Smart FAN
Support DC FAN
Onboard Power
Rear Panel I / O – 2 * USB 2.0/1.1 ports
– 1 * PS/2 Keyboard connector
– 1 * RJ-45 port
– 3 * Audio I/O ports ( Line-in, mic and line-out )
– 1 * HDTV
– 1 * TV-Out RCA
– 1 * VGA port
– 1 * COM port
– 1 *12V DC Power
Internal I / O – 2 * USB 2.0/1.1 headers for 4 USB 2.0 ports
– 1 * 18-bit dual channel LVDS connector
– NB / Chassis Fan connectors;
– 1 * COM header RS422/485 (12V/5V selectable)
– 1 * Parallel header
– 1 * 8bit GPIO
BIOS Award 8MB SPI Flash ROM
Form Factor Mini ITX Form Factor(17cmx17cm)
Scope of supply – Jetway JNF92-270-LF ITX Mainboard
– Driver CD
– Manual
– 1x IDE cable
– 1x HDTV PCI connector plate
– 2x SATA cables
– ATX I/O shield

Notes:
– The board can be powered directly from an AC/DC 12V adapter.
– For vehcile-operation you can use the “DC/DC converter for Intel D945GSEJT”.

Click here to read more about Jetway JNF92-270-LF (with integrated Atom 1.6Ghz CPU, LVDS, HDTV, Onboard power) [FANLESS]

Jetway JNF92-270-LF Intel Atom ITX Mainboard

Comments are closed.