Fujitsu D2963-S Fanless Mini ITX Computer Barebones
The new fanless Industrial-ITX barebones from Fujitsu are available! Both versions come with fanless, already soldered AMD Mobile CPU and ATI Radeon X1250 graphics adapter onboard. These barebones were designed for industrial environments. The systems can be used for 24/7 operation. The barebones are long term available (5 years).
Fujitsu D2963-S1 Fanless Barebone (AMD Mobile Sempron 200U, 1Ghz, ATI Radeon)
– ATI Radeon X1250 graphics on board; VGA, DVI and Dual Channel LVDS
– support HD Audio on board
– Dual GbE LAN on board
– Serial ATA II RAID on board
– CF support (for Embedded OS) on board
– Mini PCI Express support (eg. for WLAN) on board
– USB 2.0 on board
– Board Support Package (BSP) for Windows XP Embedded
– BSP f. Windows CE 6.0 (planned)
– Evaluation BSP for Embedded Linux (emlix)
For a full PC you need in addition :
– 2.5″ HDD/SSD or CompactFlash
– SO-DDR2-RAM
– 19VDC or 24VDC power source
The enclosure can be operated fully fanless with the D2963-S1 even under full load in continous operation. But an enclosure fan is included in scope of supply which can get connected to the mainboard in case the enclosure is installed in an area with limited air flow or when using a PCI card with appropriate specifications.
Name | Fujitsu D2963-S1 Barebone |
Form Factor | Mini-ITX System |
CPU | AMD Mobile Sempron™ 200U Single Core Processor (1.0GHz; 8W) |
Chipset | AND N690E & SB600 |
Graphics | Integrated ATI Radeon X1250 graphics; shared memory (up to 256MB); DirectX 9 compliant; DVI, VGA and 24Bit / Dual Channel LVDS support |
Memory | 1 x SO DIMM Socket (1.8V), max. 4GB, Single Channel DDR2-800 (CL6) / DDR2-667 (CL5) SDRAM, unbuffered, no ECC Note: Effective memory speed depends on installed processor! |
Audio | Realtek ALC262 (HD Audio); HW 3D Stereo Enhancement; SW Wavetable Synthesis Support |
LAN | Dual Realtek RTL8111C 10/100/1000 Ethernet controller; WoL support |
Power | 19-24V / 3A via DC-connector (rear I/O connector or onboard connector) 5V and 3.3V Supply Voltage on PCI Slot (PCI Rev. 2.3) 3.3V Auxiliary Supply Voltage on PCI Slot (Wake-Up Support) Onboard CPU Core Voltage Regulator |
Connectors (rear) | – 1x DVI – 1x RS232 – 4x USB 2.0 – Audio – 2x LAN 10/100/1000 MBit – 1x PS/2 (Keyboard) – 1x PS/2 (Mouse) – 1x DC-In (19-24V, 3A) |
SATA | 2x SATA-II (RAID) |
Connectors (internal) | – 1x Mini PCI Express (rear side) – 1x Compact-Flash – 1x Internal USB connector (for eg. USB stick) – 1x RS232 – Front Panel Audio – 4x USB 2.0 – 2x SATA – 2x Fan header – 1x SMBus – 1x LVDS – 1x 8bit GPIO |
Included | – Fujitsu D2963-S1 ITX mainboard – Fujitsu ITX Enclosure for D2963-S – Stand for ITX enclosure – I/O ATX rear plate – Heatsink + adapter plate – 1x SATA cable – Quickstart-Guide – Drivers CD |
Dimensions of enclosure : 250 x 52 x 191 mm
Fujitsu D2963-S2 Fanless Barebone (AMD Mobile Athlon Neo X2 L325, 1.5Ghz, ATI Radeon)
– ATI Radeon X1250 graphics on board; VGA, DVI and Dual Channel LVDS
– support HD Audio on board
– Dual GbE LAN on board
– Serial ATA II RAID on board
– CF support (for Embedded OS) on board
– Mini PCI Express support (eg. for WLAN) on board
– USB 2.0 on board
– Board Support Package (BSP) for Windows XP Embedded
– BSP f. Windows CE 6.0 (planned)
– Evaluation BSP for Embedded Linux (emlix)
For a full PC you need in addition :
– 2.5″ HDD/SSD or CompactFlash
– SO-DDR2-RAM
– 19VDC or 24VDC power source
Name | Fujitsu D2963-S2 Barebone |
Form Factor | Mini-ITX System |
CPU | AMD Mobile Athlon™ Neo L325 Dual Core Processor (1.5GHz/18W) |
Chipset | AND N690E & SB600 |
Graphics | Integrated ATI Radeon X1250 graphics; shared memory (up to 256MB); DirectX 9 compliant; DVI, VGA and 24Bit / Dual Channel LVDS support |
Memory | 1 x SO DIMM Socket (1.8V), max. 4GB, Single Channel DDR2-800 (CL6) / DDR2-667 (CL5) SDRAM, unbuffered, no ECC Note: Effective memory speed depends on installed processor! |
Audio | Realtek ALC262 (HD Audio); HW 3D Stereo Enhancement; SW Wavetable Synthesis Support |
LAN | Dual Realtek RTL8111C 10/100/1000 Ethernet controller; WoL support |
Power | 19-24V / 3A via DC-connector (rear I/O connector or onboard connector) 5V and 3.3V Supply Voltage on PCI Slot (PCI Rev. 2.3) 3.3V Auxiliary Supply Voltage on PCI Slot (Wake-Up Support) Onboard CPU Core Voltage Regulator |
Connectors (rear) | – 1x DVI – 1x RS232 – 4x USB 2.0 – Audio – 2x LAN 10/100/1000 MBit – 1x PS/2 (Keyboard) – 1x PS/2 (Mouse) – 1x DC-In (19-24V, 3A) |
SATA | 2x SATA-II (RAID) |
Connectors (internal) | – 1x Mini PCI Express (rear side) – 1x Compact-Flash – 1x Internal USB connector (for eg. USB stick) – 1x RS232 – Front Panel Audio – 4x USB 2.0 – 2x SATA – 2x Fan header – 1x SMBus – 1x LVDS – 1x 8bit GPIO |
Included | – Fujitsu D2963-S2 ITX mainboard – Fujitsu ITX Enclosure for D2963-S – Stand for ITX enclosure – I/O ATX rear plate – Heatsink + adapter plate – 1x SATA cable – Quickstart-Guide – Drivers CD |
Dimensions of enclosure : 250 x 52 x 191 mm
Click here to read more about Fujitsu D2963-S1 Barebone (AMD Mobile Sempron 200U, 1Ghz, ATI Radeon) [FANLESS]
Click here to read more about Fujitsu D2963-S2 Barebone (AMD Mobile Athlon Neo X2 L325, 1.5Ghz, ATI Radeon) [FANLESS]
Comments are closed.