Archive | Touchscreen Displays RSS feed for this section
[NEW] Nanovision MIMO UM-1010S/F 10.1″ USB Display with Multi-Touchscreen

[NEW] Nanovision MIMO UM-1010S/F 10.1″ USB Display with Multi-Touchscreen

This TFT monitor is connected to a Windows PC USB connector. The display is working as an additional display which can be added to the main display area on the left, right, upper or lower. Alternatively it can mirror the primary screen. The display can be swiveled in steps of 90°. In addition, the UM-1010S/F model comes with capacitive multi touchscreen!

Read more
CarTFT HDMI TFT displays with All-In-One cable

CarTFT HDMI TFT displays with All-In-One cable

The new HDMI display model series of CarTFT.com with All-In-One connector cable is available! The new series CTFHD combines a wide range of functions and options. They are equipped with a sensor that automatically adjusts the backlight, as well as a front button for manual control. The displays switch on/off automatically depending on HDMI signal. The so-called “All-In-One”-connector cable reduces installation effort: display side there is only one connection. The cable splits up at the end into all individual plugs and sockets.

Read more
CVL1210-USB 12.1″ USB Touchscreen LED TFT Display

CVL1210-USB 12.1″ USB Touchscreen LED TFT Display

The new CVL1210-USB 12.1″ USB Touchscreen TFT display can be connected to a Windows PC through a USB connector. The display is working as an additional display which can be added to the main display area on the left, right, upper or lower. Alternatively it can mirror the primary screen. The display can be swiveled in steps of 90°. In addition, the CVL1210-USB model comes with touchscreen.

Read more
CTF1040-CTM 10.4″ Open-Frame VGA & HDMI Capacitive Multi-Touchscreen TFT Display

CTF1040-CTM 10.4″ Open-Frame VGA & HDMI Capacitive Multi-Touchscreen TFT Display

With the new CTF1040-CTM Open-Frame TFT display-series from CarTFT you get back control: The ruggedized metal frame enables you a stable installation. The single modules (Mainboard, Touchscreen controller, Power inverter and button-frame) can be screwed off from the rear side and beeing positionated elsewhere. This way you can install the connector cables more easier and the display thickness shrinks also.

Read more
CTF1040-CT(S) 10.4″ Sunlight-readable VGA/HDMI Multi-Touchscreen TFT LED Display

CTF1040-CT(S) 10.4″ Sunlight-readable VGA/HDMI Multi-Touchscreen TFT LED Display

We are presenting you another model of CTF1040 TFT display series is available. The CTF1040-CT is equipped with an LED display with 500 nits and the CTF1040-CTS model with 1100 nits. Native resolution is 1024 x 768 and the contrast is hight at 1200:1. The capacitive multi-touch screen allows 10 points usage. In addition to the All-In-One cable design both variants come with additional HDMI input.

Read more
CTF1210-SM, 12.1″ sunlight-readable VGA Multi-Touchscreen TFT LED display

CTF1210-SM, 12.1″ sunlight-readable VGA Multi-Touchscreen TFT LED display

Another model of CTF1210 TFT display series is ready. The CTF1210-SM is equipped with an LED display with 1000 nits which makes it direct sunlight-readable. The capacitive multi-touch screen allows you to operate with 2 fingers.

Read more
CTF1210-SDWP 12″ PC TFT Touchscreen display in metal enclosure with waterproof IP67

CTF1210-SDWP 12″ PC TFT Touchscreen display in metal enclosure with waterproof IP67

The new CTF1210-SDWP display is equipped with a sunlight-readable 1000 nits/LED-panel (1024×768 Pixel native resolution, 700:1 contrast). The AIO (All-in-One) cable design allows direct replacements within the CTF display series against other models. CTF1210-SDWP has a waterproof IP67-classified front which allows using it in outdoor installations (eg. on your convertible car/vehicle, boat/yacht, motorbike, etc..)

Read more
CTF840-SH ULTRA Sunlight-readable LED Carputer Display with 1000 nits

CTF840-SH ULTRA Sunlight-readable LED Carputer Display with 1000 nits

The CTF840-SH Carputer display now also is available as a version with extra-high brightness value (1000 nits) and thereby enables perfect readability even under direct sunlight.

Read more
CTFPND-8, Ruggedized 7″ High-End Tablet PC, Android OS

CTFPND-8, Ruggedized 7″ High-End Tablet PC, Android OS

Introducing the new CTFPND-8 7” capacitive multi touch display water resistant media tablet from CarTFT. CTFPND-8 is rugged design with IP67 rating whilst also being drop proof. With its detailed industrial and mechanical design, the CTFPND-8 keeps the high performance media tablet in a fashionable and durable housing which is great for outdoor activities.

Read more
RuggedPad PRO/BASIC Intel Classmate Convertible Netbook/PC

RuggedPad PRO/BASIC Intel Classmate Convertible Netbook/PC

These PCs were designed for children (under the Intel Classmate project). As a result, these netbooks are also ideal for applications in difficult environments. The PCs are designed for everyday use, the housing is shock resistant and of high quality workmanship and value. Careless handling can not harm the system. Therefore the RuggedPad is also suitable for eg. car workshops and mobile use.

Read more