M3-ATX-HV and PicoPSU-80 ATX Power Supply Units

M3-ATX-HV and PicoPSU-80 ATX Power Supply Units

The PicoPSU Power Supply Units series has 2 new models: Because of the increased voltage input range (6-34V) the M3-ATX-HV enables usage with truck 24V batteries. The PicoPSU-80 is the small brother of PicoPSU-90 and sets the entry price level lower.

picoPSU-80 DC/DC (80 Watt) – perfect for Intel Atom ITX

– for Intel Atom ITX,…
– for VIA mini-ITX boards with C3 or C7 processors, P3, P4, Pentium-M, and AMD processors.
– 80 watts
– Dimensions : 31 x 45 x 20 mm
– Power Input : 12VDC (11.5-13.0VDC)

Compact design, less cables. Introducing picoPSU-80, world’s tiniest 12V DC-DC ATX power supply unit (PSU). The picoPSU-80 is the smallest snap-in 12V ATX dc-dc power supply. The picoPSU is compatible with an entire range of mini-itx motherboards as well as regular boards. The picoPSU-80 provides a cool, silent 80 Watts of power for small PC designs using a single 12V power source.

By using Patent Pending HyperWatt [TM] technologies , picoPSU-80 packs an impressive amount of power relative with its very small footprint. PicoPSU-80 has several key advantages over traditional power supplies:

– Very small, can build unltra-compact PC enclosures and slim server enclosures.
– Fits any motherboard equipped with a 20 or 24pin ATX connector.
– 100% silent, fanless, no moving parts.
– Operates at only 12V.
– Highly efficient design, does not produce a lot of heat.
– Ideal for low power Intel Core Duo as well as all VIA C3/C7 motherboards.

Small computer projects start with small power supplies. PicoPSU-80 is a crucial key component that unleashes the ultimate power solution for general purpose computing platforms. PicoPSU-80 is fully ATX compliant PSU, making it an excellent candidate for any silent, fanless and small 12V DC-DC ATX PC power supply project.

Reduce space. Eliminate 20 unnecessary wires by plugging in directly into the motherboard ATX connector. The picoPSU-80 12V dc-dc ATX converter was designed from ground up to fit small form factor ATX boards, allowing enclosure designers to save space while not compromising power requirements.

Cool power. Operating at only 12V, the picoPSU-80 dc-dc ATX power supply delivers 80 Watts of power. picoPSU provides plenty of power (via ATX connector and HDD cable harness) for CPU and an entire range of peripherals.

100% Silent The picoPSU-80 mini PSU is a 100% silent fanless dc to dc solution. No fans, no noise, just power for small and silent PCs.
picoPSU-80 is a fully compliant DC-DC ATX PC PSU. It can power VIA mini-ITX boards with C3 or C7 processors, P3, P4, Pentium-M, Core Duo Mobile or Desktop versions and llow power AMD processors.  picoPSU-80 ATX DC-DC converter is very small, measuring just 31x45x20mm, about the size of two AA batteries, picoPSU-80 is also 1U ServerRack compliant.

M3-ATX-HV 6-34V DC/DC (95 Watt) – Now in picoPSU-format!

M3-ATX-HV is an intelligent vehicle ATX power supply. Designed to provide power and to control the ON/OFF switch of a motherboard based on ignition status, M3-ATX-HV is a wide input (6-34V) ATX power supply capable of surviving tough engine cranks (down to 5.7V) as well as transient over-voltage situations.

M3-ATX-HV has 8 user selectable microcontroller driven timing modes, allowing you to choose up to 8 ignition/shutdown timing schemes. By removing all user-selectable jumpers, M3-ATX-HV becomes a traditional PSU with no ignition control and it can be used in non-vehicle applications.

Even if your computer is totally OFF, a PC will still consume few hundered milliwatts, needed to monitor PC ON/OFF status. When the computer is in the suspend/sleep mode, it will consume even more power, because the RAM needs to be powered at all times. The power consumption in the suspend mode is few watts. No matter how big your battery is, it will eventually drain your battery in a matter of days.

While in deep sleep mode, M3-ATX-HV constantly monitors your car battery voltage levels, preventing deep discharge situations by automatically shutting down until battery levels reach safe levels again. No more dead batteries, no more computer resets during engine cranks, along with multiple timing schemes, small formfactor and very competitive price makes the M3-ATX-HV the premier solution for ATX vehicle power supply solutions.

M3-ATX-HV comes equipped with ATX, HDD and Floppy cable harness, jumpers, faston connectors and 2 pin cables for motherboard ON/OFF switch. Just connect it to your 12V car / boat / RV battery and power up your PC.  Working from 8V Power input (6V for short time) !
The M3-ATX-HV also is capable for P4(M) and AMD systems.

Scope of Supply:
– Cable for mainboard (Remote-PowerOn)
– 3x cables f. Plus, Ignition Plus, Ground (Minus)

Click here to read more about picoPSU-80 DC/DC (80 Watt) [perfect for Intel Atom ITX]
Click here to read more about M3-ATX-HV 6-34V DC/DC (95 Watt) [picoPSU-format !]

Twitter Digg Delicious Stumbleupon Technorati Facebook

Comments are closed.