[UPDATE] HAHE-MC Half-Height ITX enclosure

[UPDATE] HAHE-MC Half-Height ITX enclosure

Updates and improvements on HAHE-MC Half-Height ITX enclosure:

  • Fully black front plate
  • Installation possibilities f. 1-2x RS232 on rear side
  • Air flow mesh improved

Simple, but efficient : With this enclosure you take full advantage of the small form factor of the Intel D945GSEJT Half-Height Johnstown mainboard. And with its dimensions of only 199x180x39mm it has, with an internal volume of less than 1.4 liters, room for one 2.5″ harddrive or SSD drive. The enclosure can be operated fully fanless with the Intel D945GSEJT even under full load in continous operation.

Optionally available accessory: Stand and VESA screws for installation on TFT/LCD/Plasma (with VESA-100 drilling).
On the enclosure rear side there is a small, still closed, hole where you can eg. install a WLAN antenna.

Technical data :

  • Drives : 1x 2.5″
  • Front-connectors : 2x USB 2.0, 1x earphone, 1x microphone
  • Front-buttons : Power, Reset
  • Front-LED : Power, HDD
  • Dimensions : 199 x 180 x 39 mm

Click here to read more about HAHE-MC-B enclosure (f. Intel D945GSEJT Half-Height ITX)

Twitter Digg Delicious Stumbleupon Technorati Facebook

Comments are closed.