CarTFT FleetPC-3 CarPuter with 3G and CAN-BUS

CarTFT FleetPC-3 CarPuter with 3G and CAN-BUS

This CarPuter was especially designed for fleet applications. The CarPuter can be connected directly to the car battery (12V/24V). Based on ignition plus, the CarPuter will start and shutdown. The CarPuter is completely fanless and is equipped with an Intel Celeron Mobile (M440) 1.83Ghz CPU and 1GB RAM.

Note: For a full PC you need in addition a 2.5″ HDD/SSD or CompactFlash
Other configurations: The system also is available with other CPUs (eg. T2500/T7400/…).  And you can get 2GB RAM. The system also can be shipped without GPS, WLAN and/or GSM/GPRS option. Contact us for mote information!

Features :
– Fanless Design
– Intel Sockel P Mobile CPU Support
– Integrated, intelligent Automotive power supply
– 2x RS232 ports
– 2x Gigabit LAN ports
– DSUB-15 VGA + DVI ports
– Watchdog program
– GPS, WLAN, Bluetooth, UMTS(3.5G) with ext. antennas
– 8bit GPIO
– EMark 13 and vibration/shock tested

Dimensions / Weight 279mm W x 176mm D x 67mm H, 2.9kg
CPU Socket M (support Intel Core 2 Duo/Core Duo/Celeron M) [Intel Celeron-M 1.86Ghz included]
Chipset / FSB Intel 945GME + Intel ICH7M , 533/667Mhz FSB
RAM 1x SO-DDR-2 RAM (up to 2GB 533/667) [1GB RAM included]
Graphics Intel GMA 950
Expansion – 1x PCI-104 module slot
– Internal USB WLAN module [Included]
– Internal RS232 UMTS (3.5G) module COM3 [Included]
– Internal RS232 GPS module COM4 [Included]
OS Support Windows XP Home/Pro/Embedded, Linux FC 6/7
Vibration IEC 60068-2-64 5~500Mhz
2GRMS for CF, 3GRMS for SSD
Shock IEC 60068-2-27 50G-500m/s²-11ms
Operating temperature -20~60°C (with Industrial grade CF)
Certification CE, FCC class B, EMark 13
I/O – 2x LAN (Broadcom BCM5787)
– 4x RS232 (2x DB9, 2x internal used for GPS+UMTS)
– 4x USB2.0 (3x external, 1x internal used for WLAN)
– 8bit GPIO (4 in, 4 out)
– 1x PS/2
– Mic-In, SPK Out
– 1x Remote power control
– 15A Fuse for 12V, 0.5A for 24V
– 1x VGA (DSUB-15)
– 1x DVI
– 3x Antenna hole (GPS, UMTS, WLAN/Bluetooth)
Drive bays 1 x Anti-Shock 2.5″ HDD bracket (for IDE-44pin or SATA II)
1 x External CF slot (Type I/II)
Power supply 9~32V DC PSU included (90W max)
– Fuse design
– Power on/off retry
– Adjustable delay time for system OFF by switch
– System on/off by vehicle ignition or remote switch button
– Low power input monitoring, Auto Shutdown
Scope of supply – FleetPC-3 PC with Intel Celeron-M 440 (1.86Ghz), 1GB RAM, mounting bracket
– Quickstart-Guide, DriverCD
– Remote switch cable
– Replacement fuse f. 24V
– HDD bracket and screws
– SATA data cable, SATA power cable
– WLAN, UMTS and GPS antennas
– PS/2 Splitter cable
– 2x mounting-metal brackets

Click here to read more about CarTFT FleetPC-3-B CarPuter (Intel Celeron-M 1.8Ghz, 1GB RAM, Autostart-Controller, 9-32V Automotive PSU, WLAN, GPS, 3.5G UMTS, Bluetooth)
Click here to read more about CarTFT FleetPC-3 Modul CAN-BUS,Digital I/O, SRAM (PCI 104)

Twitter Digg Delicious Stumbleupon Technorati Facebook

Comments are closed.